Graffiti Remover - Bio compatible product approved for historical preservation

GRAFFITI REMOVER / SERIES 778

Gel product formulated to remove top coat and paint stains from natural and artificial stone, concrete and brick surfaces. It acts quickly and easy applications, non-caustic.

Bio compatible product approved for historical preservation.

• Indicative Spreading Rate: 200 Square Feet With 1 Coat
• Number of Coats: 1 - 2
• Tools: Brush, Scrubber and Scraper
• Dilution: Ready to be Used
• VOC: 14.29%

TECHNICAL DATA SHEET

DESCRIPTION
GRAFFITI REMOVER is a gel product formulated to remove defacing effected with enamel and other paints on natural and artificial stone surfaces, cement conglomerates and brick. It is easy and rapid to use. The product must not be used on surfaces decorated with paint as it will result in cosmetic damage of the surface.

INSTRUCTIONS FOR USE
May Be Applied Over:

• Unpainted natural and artificial stone surfaces, cement conglomerates and brick.
• Pay attention to plastic material: the detergent could damage them.
  

TECHNICAL SPECIFICATIONS

• Specific gravity per UNI EN ISO 2811-1: 1.09 + 0.05 kg/l at 20 °C
• Appearance: gel
  

PREPARING THE SURFACE
- - - - -

APPLICATION INSTRUCTIONS
Conditions of the Surface and Surroundings:
Air temperature: Min. +5°C / Max. +35°C .
Temperature of the surface to be treated: Min. +5°C / Max. +35°C .
The surface to be treated must be dry.

• Dilution: ready for use.
• Number of coats: apply 1 or more coats until the paint products on the surface have been completely eliminated.
• Apply the product abundantly using a brush over the area and leave to act 20-40 minutes, then remove with a suitable tool (brush, scraper) and wash with abundant hot water.
• Removal of the graffiti will depend much on the porosity of the surface; on smooth surfaces such as marble and granite, cleaning is easy, whereas on highly porous surfaces it may prove more difficult. On porous surfaces, therefore, it may be necessary to apply GRAFFITI REMOVER several times in order to clean the surface completely.
• All tools should be washed in water immediately after use.
• Indicative coverage: 4-5 m2/l. on smooth surfaces. It is recommended that a test be effected on the surface to be cleaned to determine effective consumption.
  

TINTING
- - - - -

STORAGE
Maximum temperature for storage: +30 °C .
Minimum temperature for storage: +5 °C .
Stability in original, unopened containers stored at suitable temperatures: 2 years.

SAFETY RULES
Dir. 2004/42/EC not applicable
Irritating to eyes and skin. / avoid contact with skin and eyes. / In case of contact with the eyes, wash immediately in abundant water and consult a doctor. / Use appropriate gloves. / In case of ingestion, immediately consult a doctor and show him the container or label. / Keep out of the reach of children. / Do not pour any residues down the drain. The product must be moved, used and stored in accordance with current legislation concerning health and safety; after use, do not throw away the container, but allow the contents to dry completely and treat them as special waste. For further information, consult the safety form. SPECIFICATION ITEM Application, on surfaces defaced by graffiti of detergent GRAFFITI REMOVER code 7780001, in at least 1 coat as determined by the absorption of the surface.
Supply and application of the material....................per m2
COLORIFICIO SAN MARCO guarantees that the information herein is provided to the best of its technical and scientific knowledge and based on its experience; nonetheless, the company may not be held liable for the results obtained using these products, as application conditions are beyond its control. It is recommended to always make sure that the product is suited to each specific instance. The present sheet voids and replaces any previously existing sheets. For further technical information call the technical service +39 041 4569322.